Product ID:HOT DIP STRIPPABLE COATING - DS83-9
MSDS Date:11/18/1985
FSC:8030
NIIN:00F008939
MSDS Number: BGYZC

DIP SEAL PLASTICS, INC.

2311 23RD AVE.
ROCKFORD, IL 61108

Emergency Phone: (815) 398-3533

Info Phone: (815) 398-3533

Cage: 29437

DIP SEAL PLASTICS, INC.

ROCKFORD, IL 61108

Telephone: (815) 398-3533

Cage: 29437

BUTYL BENZYL PHTHALATE (SARA III)

CAS: 85-68-7

RTECS: TH9990000

Fraction By Weight: <5%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 35%

ACGIH TLV: 5 MG/CU.M (OIL MIST)

CASTOR OIL

CAS: 8001-79-4

RTECS: FI4100000

Fraction By Weight: 30%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: MELTED COMPOUND CAN CAUSE
SEVERE BURNS. INHALATION: DUE TO THE LOW PRESSURE AT AMBIENT
TEMPERATURES NO SIGNIFICANT NASAL/RESPIRATORY IRRITATION IS
EXPECTED. INGESTION: COMPARATIVELY NON-HAZA RDOUS AT ROOM
TEMERATURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE/SKIN: MELTED COMPOUND CAN CAUSE SEVERE
BURNS. INHALATION: NO SIGNIFICANT NASAL/RESPIRATORY IRRITATION IS
EXPECTED. INGESTION: COMPARATIVELY NON-HAZARDOUS AT ROOM
TEMPERATURE.

First Aid:EYE: FLUSH W/LARGE AMOUNTS OF WATER. GET MED ATT. SKIN: COOL
AT ONCE. IF 2ND OR 3RD DEGREE BURNS ARE SUSPECTED, GET MED ATT.
INHALATION: REMOVE TO FRESH AIR. INGESTION: SMALL AMOUNTS ARE
ESSENTIALLY H ARMLESS.

Flash Point Method:COC
Flash Point:340F
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM & CO2
Fire Fighting Procedures:DON'T ENTER CONFINED SPACE W/O PROTECTIVE
EQUIP. THIS MAY INCLUDE SCBA TO PROTECT AGAINST HAZARDOUS EFFECTS
OF NORMAL PRODUCTS OF COMBUSTIO/OXYGEN DEFICIENCIES.
Unusual Fire/Explosion Hazard:WHEN HEATED >FLASH POINT, THIS MATERIAL
WILL RELEASE FLAMMABLE VAPORS WHICH CAN BURN/BE EXPLOSIVE IN
CONFINED SPACES/EXPOSED TO A SOURCE OF INGITION.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AROUND SPILL
AREA.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:MELTED DIP SEAL WILL PRODUCE SEVERE BURNS IF ON BODY.

Respiratory Protection:NONE NEEDED.
Ventilation:PROVIDE LOCAL EXHAUST PREFERRED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health

Vapor Pres:0.1
Vapor Density:10
Spec Gravity:<1
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:.1%

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS
Stability Condition to Avoid:STRONG OXIDIZERS
Hazardous Decomposition Products:CO
Conditions to Avoid Polymerization:DIPPING TEMPERATURES IN EXCESS OF
350F.

Waste Disposal Methods:DISPOSE OF CONTAMINATED MATERIAL IN AN APPROVED
DISPOSAL SITE, COMPLY W/FEDERAL, STATE & LOCAL REGULATIONS
CONCERNING WASTE DISPOSAL INTO LANDFILLS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.